Find a Service Center
- 50 mm Inside Diameter
- 90 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Closure Type | Open |
| Enclosure | Open |
| Snap Ring | No |
| Width | 20.000 mm |
| Preload Level | None |
| I.D. | 50 mm |
| Bore Type | Straight |
| Dynamic Load Rating | 39000 N |
| Precision | Standard |
| Precision Level | Standard (ABEC 1) |
| Corner Radius [Min] | 1.1 mm |
| Internal Clearance | C3 |
| Limiting Speed - Grease | 6700 rpm |
| O.D. | 90 mm |
| Inch/Metric | Metric Bore |
| Series | BL2 |
| Rows of Balls | Single |
| O.D. Type | Straight |
| Outer Ring Width | 20 mm |
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| Cage Material | Pressed Steel |
| Limiting Speed - Oil | 8500 rpm |
| Static Load Rating [Max] | 35000 N |
| Locking Device | No Locking Device |
| Material | Steel |
| Capacity | Maximum Capacity |
| Cage Type | Metal |
| Seal Type | Unsealed |
| Bearing Type | Radial and Deep Groove |
| Radial Internal Clearance Specification | Normal Clearance |
| icNumber | 7697284 |
| Seal Material | None |
| Contact Angle | 0° |
| Weight | 1.102 LB |
| EAN or UPC | 29176032165 |
