Find a Service Center
Alternate Products
- 55 mm Inside Diameter
- 100 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Dynamic Load Rating | 48000 N |
| Static Load Rating [Max] | 44000 N |
| Inch/Metric | Metric Bore |
| O.D. Type | Straight w/ Snap Ring |
| Locking Device | No Locking Device |
| Rows of Balls | Single |
| Bore Type | Straight |
| Seal Type | Unsealed |
| Corner Radius [Min] | 1.5 mm |
| icNumber | 7704731 |
| Cage Material | Pressed Steel |
| I.D. | 55 mm |
| Internal Clearance | C3 |
| Radial Internal Clearance | Normal |
| Radial Internal Clearance Specification | Normal Clearance |
| Ball Material | Steel |
| Snap Ring | Yes |
| Limiting Speed - Grease | 6300 rpm |
| Width | 21.000 mm |
| Contact Angle | 0° |
| Outer Ring Width | 21 mm |
| Limiting Speed - Oil | 7500 rpm |
| Enclosure | Open |
| Closure Type | Open |
| O.D. | 100 mm |
| Preload Level | None |
| Capacity | Maximum Capacity |
| Bearing Type | Radial and Deep Groove |
| Material | Steel |
| Precision | Standard |
| Seal Material | None |
| Cage Type | Metal |
| Series | BL2 |
| Precision Level | Standard (ABEC 1) |
| Weight | 1.444 LB |
| EAN or UPC | 29176000096 |
