Find a Service Center
Alternate Products
- 55 mm Inside Diameter
- 100 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Snap Ring | No |
| Rows of Balls | Single |
| Width | 21.000 mm |
| Enclosure | Double Shielded |
| Internal Clearance | C3 |
| Limiting Speed - Oil | N/A |
| Closure Type | Double Shielded |
| Corner Radius [Min] | 1.5 mm |
| O.D. Type | Straight |
| O.D. | 100 mm |
| Locking Device | No Locking Device |
| Dynamic Load Rating | 48000 N |
| Limiting Speed - Grease | 6300 rpm |
| Preload Level | None |
| Contact Angle | 0° |
| I.D. | 55 mm |
| Series | BL2 |
| Radial Internal Clearance | Normal |
| Seal Type | Non-Contact Seals |
| Ball Material | Steel |
| Outer Ring Width | 21 mm |
| icNumber | 7697921 |
| Capacity | Maximum Capacity |
| Material | Steel |
| Inch/Metric | Metric Bore |
| Cage Type | Metal |
| Static Load Rating [Max] | 44000 N |
| Seal Material | Metal |
| Precision Level | Standard (ABEC 1) |
| Bore Type | Straight |
| Precision | Standard |
| Radial Internal Clearance Specification | Normal Clearance |
| Bearing Type | Radial and Deep Groove |
| Cage Material | Pressed Steel |
| Weight | 1.444 LB |
| EAN or UPC | 29176028014 |
