Find a Service Center
Alternate Products
- 60 mm Inside Diameter
- 110 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Cage Material | Pressed Steel |
| Cage Type | Metal |
| Width | 22.000 mm |
| Precision | Standard |
| Preload Level | None |
| Radial Internal Clearance Specification | Normal Clearance |
| Contact Angle | 0° |
| Limiting Speed - Grease | 5600 rpm |
| Bearing Type | Radial and Deep Groove |
| Internal Clearance | C3 |
| Corner Radius [Min] | 1.5 mm |
| I.D. | 60 mm |
| Static Load Rating [Max] | 54000 N |
| Bore Type | Straight |
| icNumber | 7697264 |
| Radial Internal Clearance | Normal |
| Material | Steel |
| Closure Type | Single Shielded |
| Outer Ring Width | 22 mm |
| O.D. | 110 mm |
| Rows of Balls | Single |
| Ball Material | Steel |
| Inch/Metric | Metric Bore |
| Capacity | Maximum Capacity |
| Snap Ring | No |
| Dynamic Load Rating | 58000 N |
| Series | BL2 |
| O.D. Type | Straight |
| Enclosure | Single Shield |
| Seal Material | Metal |
| Limiting Speed - Oil | 6700 rpm |
| Precision Level | Standard (ABEC 1) |
| Seal Type | Non-Contact Seals |
| Locking Device | No Locking Device |
| Weight | 1.852 LB |
| EAN or UPC | 29176028021 |
