Find a Service Center
Alternate Products
- 65 mm Inside Diameter
- 120 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Bore Type | Straight |
| Dynamic Load Rating | 63500 N |
| Outer Ring Width | 23 mm |
| Series | BL2 |
| Precision | Standard |
| Limiting Speed - Oil | 6300 rpm |
| Corner Radius [Min] | 1.5 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Radial Internal Clearance | Normal |
| Locking Device | No Locking Device |
| Snap Ring | No |
| O.D. | 120 mm |
| Static Load Rating [Max] | 60000 N |
| Enclosure | Single Shield |
| Material | Steel |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Capacity | Maximum Capacity |
| Preload Level | None |
| Seal Material | Metal |
| Inch/Metric | Metric Bore |
| Seal Type | Non-Contact Seals |
| icNumber | 7702483 |
| Contact Angle | 0° |
| Cage Type | Metal |
| I.D. | 65 mm |
| Cage Material | Pressed Steel |
| Rows of Balls | Single |
| Bearing Type | Radial and Deep Groove |
| Limiting Speed - Grease | 5300 rpm |
| Ball Material | Steel |
| Closure Type | Double Sealed |
| Width | 23.000 mm |
| Internal Clearance | C3 |
| Weight | 2.315 LB |
| EAN or UPC | 29176032226 |
