Find a Service Center
Alternate Products
- 65 mm Inside Diameter
- 120 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Bore Type | Straight |
| Enclosure | Double Shielded |
| Material | Steel |
| Radial Internal Clearance | Normal |
| Rows of Balls | Single |
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Dynamic Load Rating | 63500 N |
| Precision | Standard |
| Locking Device | No Locking Device |
| icNumber | 7697922 |
| Cage Material | Pressed Steel |
| Limiting Speed - Grease | 5300 rpm |
| O.D. Type | Straight |
| Radial Internal Clearance Specification | Normal Clearance |
| Seal Type | Non-Contact Seals |
| Internal Clearance | C3 |
| Static Load Rating [Max] | 60000 N |
| I.D. | 65 mm |
| Closure Type | Double Shielded |
| Series | BL2 |
| Corner Radius [Min] | 1.5 mm |
| Bearing Type | Radial and Deep Groove |
| Inch/Metric | Metric Bore |
| Capacity | Maximum Capacity |
| Seal Material | Metal |
| Cage Type | Metal |
| Width | 23.000 mm |
| Outer Ring Width | 23 mm |
| Snap Ring | No |
| Ball Material | Steel |
| Preload Level | None |
| Limiting Speed - Oil | N/A |
| O.D. | 120 mm |
| Weight | 2.205 LB |
| EAN or UPC | 29176032233 |
