Find a Service Center
Alternate Products
- 80 mm Inside Diameter
- 140 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Corner Radius [Min] | 2 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| icNumber | 7702534 |
| I.D. | 80 mm |
| Material | Steel |
| Bore Type | Straight |
| Limiting Speed - Oil | 5300 rpm |
| Capacity | Maximum Capacity |
| Cage Type | Metal |
| Rows of Balls | Single |
| Preload Level | None |
| Contact Angle | 0° |
| Radial Internal Clearance | Normal |
| Precision | Standard |
| Inch/Metric | Metric Bore |
| Seal Type | Unsealed |
| Outer Ring Width | 26 mm |
| Internal Clearance | C3 |
| Width | 26.000 mm |
| O.D. Type | Straight |
| Enclosure | Open |
| Series | BL2 |
| Limiting Speed - Grease | 4300 rpm |
| Snap Ring | No |
| Seal Material | None |
| O.D. | 140 mm |
| Closure Type | Open |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Bearing Type | Radial and Deep Groove |
| Dynamic Load Rating | 84000 N |
| Static Load Rating [Max] | 85000 N |
| Cage Material | Pressed Steel |
| Weight | 3.197 LB |
| EAN or UPC | 29176038945 |
