Find a Service Center
Alternate Products
- 25 mm Inside Diameter
- 62 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Ball Material | Steel |
| Precision | Standard |
| Contact Angle | 0° |
| Radial Internal Clearance Specification | Normal Clearance |
| Material | Steel |
| Cage Type | Metal |
| Corner Radius [Min] | 1.1 mm |
| Seal Type | Non-Contact Seals |
| Enclosure | Single Shield |
| Bore Type | Straight |
| icNumber | 7702478 |
| Limiting Speed - Grease | 11000 rpm |
| Seal Material | Metal |
| Internal Clearance | C0 |
| Bearing Type | Radial and Deep Groove |
| Static Load Rating [Max] | 15500 N |
| Radial Internal Clearance | Normal |
| I.D. | 25 mm |
| Width | 17.000 mm |
| O.D. | 62 mm |
| Cage Material | Pressed Steel |
| O.D. Type | Straight |
| Precision Level | Standard (ABEC 1) |
| Preload Level | None |
| Outer Ring Width | 17 mm |
| Limiting Speed - Oil | 13000 rpm |
| Dynamic Load Rating | 21500 N |
| Rows of Balls | Single |
| Capacity | Maximum Capacity |
| Snap Ring | No |
| Closure Type | Single Shielded |
| Inch/Metric | Metric Bore |
| Series | BL3 |
| Locking Device | No Locking Device |
| Weight | 0.54 LB |
| EAN or UPC | 29176032363 |
