Find a Service Center
Alternate Products
- 30 mm Inside Diameter
- 72 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Precision Level | Standard (ABEC 1) |
| Contact Angle | 0° |
| Locking Device | No Locking Device |
| Material | Steel |
| Corner Radius [Min] | 1.1 mm |
| Bore Type | Straight |
| Enclosure | Double Shielded |
| icNumber | 7700354 |
| Width | 19.000 mm |
| Rows of Balls | Single |
| I.D. | 30 mm |
| Seal Material | Metal |
| Outer Ring Width | 19 mm |
| O.D. | 72 mm |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Grease | 9000 rpm |
| Limiting Speed - Oil | N/A |
| Snap Ring | No |
| Series | BL3 |
| Cage Type | Metal |
| Internal Clearance | C3 |
| Radial Internal Clearance | Normal |
| Closure Type | Double Sealed |
| Ball Material | Steel |
| Capacity | Maximum Capacity |
| Precision | Standard |
| Seal Type | Non-Contact Seals |
| Inch/Metric | Metric Bore |
| Bearing Type | Radial and Deep Groove |
| O.D. Type | Straight |
| Dynamic Load Rating | 27900 N |
| Preload Level | None |
| Static Load Rating [Max] | 20700 N |
| Cage Material | Pressed Steel |
| Weight | 0.805 LB |
| EAN or UPC | 29176032387 |
