Find a Service Center
Alternate Products
- 50 mm Inside Diameter
- 110 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Radial Internal Clearance | Normal |
| Inch/Metric | Metric Bore |
| Enclosure | Open |
| Precision Level | Standard (ABEC 1) |
| Locking Device | No Locking Device |
| Precision | Standard |
| Snap Ring | No |
| Limiting Speed - Grease | 6000 rpm |
| Ball Material | Steel |
| Seal Type | Unsealed |
| Bore Type | Straight |
| Width | 27.000 mm |
| Closure Type | Open |
| Internal Clearance | C3 |
| Corner Radius [Min] | 2 mm |
| Cage Material | Pressed Steel |
| Radial Internal Clearance Specification | Normal Clearance |
| Limiting Speed - Oil | 7100 rpm |
| Bearing Type | Radial and Deep Groove |
| Outer Ring Width | 27 mm |
| Capacity | Maximum Capacity |
| Rows of Balls | Single |
| icNumber | 7698860 |
| Static Load Rating [Max] | 52500 N |
| Cage Type | Metal |
| O.D. Type | Straight |
| Seal Material | None |
| Dynamic Load Rating | 65000 N |
| Series | BL3 |
| I.D. | 50 mm |
| Preload Level | None |
| O.D. | 110 mm |
| Material | Steel |
| Contact Angle | 0° |
| Weight | 2.205 LB |
| EAN or UPC | 29176000157 |
