Find a Service Center
Alternate Products
- 50 mm Inside Diameter
- 110 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Seal Material | None |
| O.D. Type | Straight w/ Snap Ring |
| Cage Type | Metal |
| Precision Level | Standard (ABEC 1) |
| I.D. | 50 mm |
| Inch/Metric | Metric Bore |
| Dynamic Load Rating | 65000 N |
| Precision | Standard |
| Bore Type | Straight |
| Closure Type | Open |
| Cage Material | Pressed Steel |
| Width | 27.000 mm |
| Limiting Speed - Grease | 6000 rpm |
| Locking Device | No Locking Device |
| Material | Steel |
| Rows of Balls | Single |
| Static Load Rating [Max] | 52500 N |
| Outer Ring Width | 27 mm |
| Capacity | Maximum Capacity |
| Ball Material | Steel |
| Radial Internal Clearance | Normal |
| Bearing Type | Radial and Deep Groove |
| Enclosure | Open |
| Internal Clearance | C3 |
| Seal Type | Unsealed |
| Snap Ring | Yes |
| Radial Internal Clearance Specification | Normal Clearance |
| Preload Level | None |
| Limiting Speed - Oil | 7100 rpm |
| Contact Angle | 0° |
| Series | BL3 |
| Corner Radius [Min] | 2 mm |
| O.D. | 110 mm |
| icNumber | 7704741 |
| Weight | 2.568 LB |
| EAN or UPC | 29176028182 |
