Find a Service Center
Alternate Products
- 60 mm Inside Diameter
- 130 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Corner Radius [Min] | 2.1 mm |
| Capacity | Maximum Capacity |
| Enclosure | Open |
| Precision | Standard |
| Bearing Type | Radial and Deep Groove |
| Bore Type | Straight |
| Outer Ring Width | 31 mm |
| I.D. | 60 mm |
| Precision Level | Standard (ABEC 1) |
| Limiting Speed - Grease | 5000 rpm |
| Locking Device | No Locking Device |
| Preload Level | None |
| Static Load Rating [Max] | 71500 N |
| Limiting Speed - Oil | 6000 rpm |
| Radial Internal Clearance Specification | Normal Clearance |
| Cage Type | Metal |
| Width | 31.000 mm |
| Rows of Balls | Single |
| O.D. | 130 mm |
| Contact Angle | 0° |
| Seal Type | Unsealed |
| icNumber | 7704745 |
| Material | Steel |
| Ball Material | Steel |
| Dynamic Load Rating | 85500 N |
| Series | BL3 |
| Closure Type | Open |
| Internal Clearance | C3 |
| Radial Internal Clearance | Normal |
| Inch/Metric | Metric Bore |
| O.D. Type | Straight w/ Snap Ring |
| Snap Ring | Yes |
| Seal Material | None |
| Cage Material | Pressed Steel |
| Weight | 4.125 LB |
| EAN or UPC | 29176032509 |
