Find a Service Center
Alternate Products
- 60 mm Inside Diameter
- 130 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Outer Ring Width | 29 mm |
| Radial Internal Clearance | Normal |
| Preload Level | None |
| Capacity | Maximum Capacity |
| Bore Type | Straight |
| icNumber | 7697927 |
| Contact Angle | 0° |
| Enclosure | Double Shielded |
| Limiting Speed - Oil | N/A |
| Material | Steel |
| Rows of Balls | Single |
| Width | 31.000 mm |
| Closure Type | Double Shielded |
| Series | BL3 |
| O.D. | 130 mm |
| Dynamic Load Rating | 85500 N |
| Cage Material | Pressed Steel |
| I.D. | 60 mm |
| Corner Radius [Min] | 2.1 mm |
| Precision | Standard |
| Cage Type | Metal |
| Ball Material | Steel |
| Precision Level | Standard (ABEC 1) |
| Limiting Speed - Grease | 5000 rpm |
| Static Load Rating [Max] | 71500 N |
| Inch/Metric | Metric Bore |
| Locking Device | No Locking Device |
| Seal Type | Non-Contact Seals |
| Internal Clearance | C0 |
| Bearing Type | Radial and Deep Groove |
| Seal Material | Metal |
| Radial Internal Clearance Specification | Normal Clearance |
| O.D. Type | Straight |
| Snap Ring | No |
| Weight | 3.968 LB |
| EAN or UPC | 29176032523 |
