Find a Service Center
- 85 mm Inside Diameter
- 180 mm Outside Diameter
description
- Maximum capacity bearings are filling slot type bearings used in applications involving heavy radial loads and low speeds where thrust loads are comparatively low.They incorporate filling slots in the inner and outer rings so they can be loaded with additional balls for greater capacity.
| Contact Angle | 0° |
| Series | BL3 |
| O.D. | 180 mm |
| Ball Material | Steel |
| Outer Ring Width | 41 mm |
| Bore Type | Straight |
| Seal Type | Unsealed |
| Cage Type | Metal |
| Enclosure | Open |
| Cage Material | Pressed Steel |
| Radial Internal Clearance Specification | Normal Clearance |
| Precision | Standard |
| Rows of Balls | Single |
| Static Load Rating [Max] | 145000 N |
| Limiting Speed - Oil | 4300 rpm |
| I.D. | 85 mm |
| icNumber | 7702543 |
| Seal Material | None |
| Precision Level | Standard (ABEC 1) |
| Bearing Type | Radial and Deep Groove |
| Capacity | Maximum Capacity |
| Dynamic Load Rating | 147000 N |
| Inch/Metric | Metric Bore |
| Snap Ring | No |
| Radial Internal Clearance | Normal |
| Internal Clearance | C3 |
| Material | Steel |
| Locking Device | No Locking Device |
| Width | 41.000 mm |
| Closure Type | Double Sealed |
| Limiting Speed - Grease | 3600 rpm |
| O.D. Type | Straight |
| Corner Radius [Min] | 3 mm |
| Preload Level | None |
| Weight | 10.141 LB |
| EAN or UPC | 29176028236 |
