The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Reed, hall effect and inductive proximity sensors
Shock absorbers
Shock ready
Slides without cylinders
Cylinder Bore Size
1.5 in
Port Size
1/4
Proximity Sensor Code
None
Slide Orientation
Right Hand (Standard)
Dowel Pin Holes
w/o Dowel Pin Holes
Temperature Range [Min]
0 °F
Cushions - Slide
Cushioned (Both Ends)
Cylinder Type
NFPA Pneumatic Cylinder
Proximity Sensor
No Proximity Sensor
Weight per Inch
0.48 lb
Shock Absorbers - Slide
Shock Absorber w/Stroke Adjuster (Both Ends)
Support Rod Diameter
20 mm
Flow Controls
w/o Flow Controls
Pressure [Max]
150 psi
Support Rod Material
Steel
Cylinder Seal Material
Buna-N
Bearing Type
Composite Bearing
Temperature Range [Max]
165 °F
Base Wt.
8.86 lb
Stroke
4 in
Slide Configuration Option Code
A, C
Bumpers - Slide
No Bumpers
Series
HBT
Stroke Tolerance
+0.030 in / -0.000 in
Port Type
NPTF
Port Location
Standard (Position 1)
Positions
2 Position
Slide Type
Thrust Slide
Intermediate Stroke
N/A
Weight
10.78 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
