Skip to content Skip to navigation menu


HBT Series Cantilevered Style Guided Cylinder

Item #101886044
    Shipment Options

Product details

  • Series HBT 2 Position RH (Std) Thrust Slide
  • 8" Stroke
  • Steel Rails
  • Composite Bearing w/Oversized Support Rods
  • 1 1/2" Bore NFPA Hydraulic Cylinder


  • The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.


  • Three-position cylinders
  • Adjustable stop collars
  • Cylinder cushions
  • Cylinder with rod lock mechanism
  • External bumpers
  • Flow controls
  • Fluorocarbon (Viton) seals
  • Oversized shafting with composite bushings
  • Proximity sensors


Port Size 1/4
Cushions - Slide No Cushions
Proximity Sensor Code J1
Slide Configuration Option Code A
Cylinder Seal Material Buna-N
Cylinder Bore Size 1.5 in
Intermediate Stroke N/A
Port Type NPTF
Slide Type Thrust Slide
Stroke Tolerance +0.030 in / -0.000 in
Weight per Inch 0.63 lb
Base Wt. 9.83 lb
Bearing Type Composite Bearing w/Oversized Support Rods
Stroke 8 in
Bumpers - Slide No Bumpers
Dowel Pin Holes w/o Dowel Pin Holes
Series HBT
Temperature Range [Min] 0 °F
Positions 2 Position
Port Location Standard (Position 1)
Flow Controls w/o Flow Controls
Support Rod Diameter 25 mm
Pressure [Max] 750 psi
Shock Absorbers - Slide Shock Absorber w/Stroke Adjuster (Both Ends)
Proximity Sensor Prox Ready, 12 mm
Support Rod Material Steel
Temperature Range [Max] 165 °F
Cylinder Type NFPA Hydraulic Cylinder
Slide Orientation Right Hand (Standard)
Weight 14.87 LB
Close Compare List Open Compare List Toggle

Product Comparison