The HBT series utilizes an alignment coupler which prevents the piston rod from deflecting under high loads or long strokes. Standard piston wear bands allow the piston rod assembly to "float" in the bore thereby eliminating metal-to-metal contact. The result is dramatically greater cylinder seal life especially when the support shafts deflect under load. This ensures very long cylinder life with reduced maintenance and downtime.
options
Three-position cylinders
Adjustable stop collars
Cylinder cushions
Cylinder with rod lock mechanism
External bumpers
Flow controls
Fluorocarbon (Viton) seals
Oversized shafting with composite bushings
Proximity sensors
Reed, hall effect and inductive proximity sensors
Shock absorbers
Shock ready
Slides without cylinders
Shock Absorbers - Slide
No Shock Absorber
Cushions - Slide
No Cushions
Proximity Sensor Code
None
Support Rod Material
Steel
Port Location
Standard (Position 1)
Bumpers - Slide
Bumpers (Both Ends)
Pressure [Max]
750 psi
Support Rod Diameter
30 mm
Intermediate Stroke
N/A
Weight per Inch
0.85 lb
Slide Type
Thrust Slide
Flow Controls
w/o Flow Controls
Positions
2 Position
Dowel Pin Holes
w/o Dowel Pin Holes
Cylinder Seal Material
Buna-N
Port Type
NPTF
Temperature Range [Min]
0 °F
Bearing Type
Composite Bearing
Stroke
9 in
Base Wt.
24.45 lb
Cylinder Type
NFPA Hydraulic Cylinder
Proximity Sensor
No Proximity Sensor
Slide Orientation
Right Hand (Standard)
Series
HBT
Temperature Range [Max]
165 °F
Port Size
3/8
Slide Configuration Option Code
B
Cylinder Bore Size
2.5 in
Stroke Tolerance
+0.030 in / -0.000 in
Weight
0.0 LB
Prop 65
My Applied Catalog
We're here for you
with Service Centers across the country - We have your back
Find a Service Center
