Find a Service Center
- 0.5 in Inner Diameter
- 1.125 in Outer Diameter
- 52100 Bearing Quality Steel Material
description
- Precision-ground 1600 series bearings are specially designed to provide a line of low-cost yet high quality bearings for adaptations. They are made in easy-to-use inch dimensions and are recommended for medium loads and for maximum speeds in the range of 5,000 rpm. The 1600 series bearings are precision ground on all surfaces with exceptional care given to the ball grooves. Careful heat treatment provides a uniform and exact degree of hardness for maximum life. A ball retainer or separator is used to increase the range of allowable speeds by reducing ball-to-ball contact friction. The 1600 series radial bearings are available open, single, or doubled shielded, or single or double sealed. Double-sealed and double-shielded bearings are supplied grease packed as standard. Open and single-closure bearings can be supplied greased on request.
features
- Improved ball groove finish
- Ground bores
- Grease packed
- Nylon seals
- Precision-ground on all contact surfaces
- Easy-to-use inch dimensions
- Medium loads
- Max speed range - 5000 - 6000 rpm
- Through-hardened bearing steel
- Nylon retainer standard
- Greased, double-sealed, or double-shielded standard
- Available single sealed or single shielded, open, and with or without grease
| Limiting Speed - Oil | 6000 rpm |
| Total Width | 0.375 in, 9.52 mm |
| RPM [Max] | 5000 rpm |
| Cage Type | Plastic |
| Type | Sealed |
| Snap Ring | No Snap Ring |
| Ball Material | Steel |
| Inch/Metric | Inch |
| Operating Temperature [Min] | -40 ⁰F |
| Outside Ring Width | 0.375 in, 9.52 mm |
| O.D. | 1.125 in, 28.58 mm |
| Limiting Speed | 6000 rpm |
| Precision Level | Standard (ABEC 1) |
| Series | Nice® |
| Precision | Standard |
| Fillet Radius | 0.025 in, 0.64 mm |
| Cage Material | Nylon |
| Enclosure | Double Sealed |
| Outside Ring Shape | Straight |
| Finish | Chrome Steel |
| O.D. Type | Straight |
| Style | Precision Ground, Double Seals |
| Filling Slot | Single Row Non-Fill Slot |
| Limiting Speed - Grease | 6000 rpm |
| Dynamic Load Rating | 1200 lbf |
| Inner Ring Width | 3/8 in |
| Radial Internal Clearance | Normal |
| Inside Ring Width | 0.375 in, 9.52 mm |
| I.D. | 0.5 in, 12.7 mm |
| Locking Device | No Locking Device |
| No. of Rows | Single |
| Contact Angle | 0° |
| Lubricant | General Purpose |
| Bore Shape | Round |
| Width | 3/8 in |
| Internal Clearance | C0 |
| Static Load Rating [Max] | 475 lbf |
| Rows of Balls | Single |
| Static Load Rating | 475 lbf, 2113 N |
| Material | 52100 Bearing Quality Steel |
| No. in Set | Single Bearing |
| Bore Type | Round Bore |
| Preload Level | None |
| Operating Temperature [Max] | 284 ⁰F |
| Outer Ring Width | 3/8 in |
| Weight | 0.06 LB |
| EAN or UPC | 637400291471 |
