Find a Service Center
- Gray Iron Material
- Bushed Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- Browning Split Taper Bushed Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- When you think "Special" Gears - Think Browning
| No. of Teeth | 44 |
| Face Width (in) | 3.5 |
| Bore (Min) (in) | 1.125 |
| Number of Teeth/Threads | 44 |
| Material | Gray Iron |
| Bore Size (in) | 1.125 |
| Hub Diameter (in) | 5.375 |
| Gear Construction | Spoked |
| Standards Met | AGMA |
| Outside Diameter (in) | 11.5 |
| Overall Length (in) | 3.5 |
| Pitch Diameter (in) | 11 |
| Length Through Bore (in) | 2.875 |
| Diametral Pitch | 4 |
| Pressure Angle | 20 degrees |
| Bore (Max) (in) | 3.75 |
| Bore Type | Bushed Bore |
| Length Through Bore | 2.875 in |
| Pitch Diameter | 11 in |
| Hub Projection (in) | 0.625 |
| Bushing Bore Size (in) | 1.1250 to 3.7500 |
| Weight | 48.02 LB |
| EAN or UPC | 662289188406 |
