Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Gears are rated in accordance with AGMA standards
- Browning Minimum Bore Spur Gear
- When you think "Special" Gears - Think Browning
| Bore (Min) (in) | 0.875 |
| Bore (Max) (in) | 1.75 |
| Pressure Angle | 20 degrees |
| Outside Diameter (in) | 3.2 |
| Number of Teeth/Threads | 30 |
| Bore Type | Minimum Plain Bore |
| Bore Size (in) | 0.875 |
| Pitch Diameter | 3 in |
| Pitch Diameter (in) | 3 |
| Standards Met | AGMA |
| Diametral Pitch | 10 |
| Face Width (in) | 1.25 |
| No. of Teeth | 30 |
| Material | Steel |
| Overall Length (in) | 2.25 |
| Length Through Bore (in) | 2.25 |
| Hub Projection (in) | 1 |
| Length Through Bore | 2.250 in |
| Hub Diameter (in) | 2.625 |
| Weight | 3.65 LB |
| EAN or UPC | 662289126576 |
