Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Minimum Bore Spur Gear
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
| Hub Diameter (in) | 1.5 |
| Face Width (in) | 1 |
| Outside Diameter (in) | 1.91 |
| Number of Teeth/Threads | 21 |
| Pitch Diameter | 1.75 in |
| Length Through Bore | 1.625 in |
| Pressure Angle | 20 degrees |
| Bore Type | Minimum Plain Bore |
| Diametral Pitch | 12 |
| No. of Teeth | 21 |
| Length Through Bore (in) | 1.625 |
| Standards Met | AGMA |
| Bore (Min) (in) | 0.75 |
| Pitch Diameter (in) | 1.75 |
| Overall Length (in) | 1.625 |
| Material | Steel |
| Bore (Max) (in) | 0.875 |
| Hub Projection (in) | 0.625 |
| Bore Size (in) | 0.75 |
| Weight | 0.8 LB |
| EAN or UPC | 662289306251 |
