Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Minimum Bore Spur Gear
| Face Width (in) | 0.75 |
| Bore Size (in) | 0.75 |
| Pitch Diameter (in) | 4.5 |
| Pressure Angle | 20 degrees |
| Bore (Min) (in) | 0.75 |
| Number of Teeth/Threads | 72 |
| Diametral Pitch | 16 |
| No. of Teeth | 72 |
| Length Through Bore | 1.500 in |
| Length Through Bore (in) | 1.5 |
| Bore (Max) (in) | 1.625 |
| Standards Met | AGMA |
| Outside Diameter (in) | 4.62 |
| Material | Steel |
| Hub Diameter (in) | 2.5 |
| Overall Length (in) | 1.5 |
| Hub Projection (in) | 0.75 |
| Pitch Diameter | 4.5 in |
| Bore Type | Minimum Plain Bore |
| Weight | 4.265 LB |
| EAN or UPC | 662289126118 |
