Find a Service Center
Alternate Products
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Hub Projection (in) | 0.5 |
| Outside Diameter (in) | 1.25 |
| Bore Type | Bored to Size |
| Bore Size (in) | 0.5 |
| Number of Teeth/Threads | 18 |
| Overall Length (in) | 1.25 |
| Material | Steel |
| Face Width (in) | 0.75 |
| Bore (Min) (in) | 0.5 |
| Standards Met | AGMA |
| Pitch Diameter (in) | 1.125 |
| No. of Teeth | 18 |
| Bore Size | 0.500 in |
| Bore (Max) (in) | 0.5 |
| Length Through Bore (in) | 1.25 |
| Length Through Bore | 1.250 in |
| Pressure Angle | 20 degrees |
| Hub Diameter (in) | 0.9375 |
| Diametral Pitch | 16 |
| Pitch Diameter | 1.125 in |
| Weight | 0.27 LB |
| EAN or UPC | 662289043033 |
