Find a Service Center
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- Browning Gears are rated in accordance with AGMA standards
| Bore Size | 0.625 in |
| Face Width (in) | 0.75 |
| Material | Steel |
| Outside Diameter (in) | 1.37 |
| Pressure Angle | 20 degrees |
| Diametral Pitch | 16 |
| Bore (Max) (in) | 0.625 |
| Bore Size (in) | 0.625 |
| No. of Teeth | 20 |
| Length Through Bore (in) | 1.25 |
| Pitch Diameter (in) | 1.25 |
| Bore (Min) (in) | 0.625 |
| Bore Type | Bored to Size |
| Standards Met | AGMA |
| Hub Diameter (in) | 1.0625 |
| Hub Projection (in) | 0.5 |
| Length Through Bore | 1.250 in |
| Overall Length (in) | 1.25 |
| Pitch Diameter | 1.25 in |
| Number of Teeth/Threads | 20 |
| Weight | 0.715 LB |
| EAN or UPC | 662289138722 |
