Find a Service Center
Alternate Products
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
| Pitch Diameter (in) | 1.75 |
| Pitch Diameter | 1.75 in |
| Face Width (in) | 0.75 |
| Bore (Min) (in) | 0.625 |
| No. of Teeth | 28 |
| Length Through Bore | 1.250 in |
| Bore (Max) (in) | 0.625 |
| Bore Type | Bored to Size |
| Overall Length (in) | 1.25 |
| Bore Size | 0.625 in |
| Number of Teeth/Threads | 28 |
| Bore Size (in) | 0.625 |
| Material | Steel |
| Hub Diameter (in) | 1.5 |
| Standards Met | AGMA |
| Hub Projection (in) | 0.5 |
| Outside Diameter (in) | 1.87 |
| Length Through Bore (in) | 1.25 |
| Diametral Pitch | 16 |
| Pressure Angle | 20 degrees |
| Weight | 0.665 LB |
| EAN or UPC | 662289118793 |
