Find a Service Center
Alternate Products
- Steel Material
- Finished Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Finish Bore Spur Gears are shaft ready and eliminate costly reworking of minimum bore gears
| Bore (Min) (in) | 0.625 |
| Bore Type | Bored to Size |
| Pressure Angle | 20 degrees |
| Material | Steel |
| Overall Length (in) | 1.25 |
| No. of Teeth | 30 |
| Hub Diameter (in) | 1.625 |
| Face Width (in) | 0.75 |
| Pitch Diameter (in) | 1.875 |
| Diametral Pitch | 16 |
| Bore Size (in) | 0.625 |
| Bore Size | 0.625 in |
| Pitch Diameter | 1.875 in |
| Bushing Bore Size (in) | 0.6250 |
| Hub Projection (in) | 0.5 |
| Outside Diameter (in) | 2 |
| Number of Teeth/Threads | 30 |
| Standards Met | AGMA |
| Bore (Max) (in) | 0.625 |
| Gear Construction | Plain |
| Length Through Bore | 1.250 in |
| Length Through Bore (in) | 1.25 |
| Weight | 0.8 LB |
| EAN or UPC | 662289043064 |
