Find a Service Center
Alternate Products
- Steel Material
- Minimum Plain Bore Type
description
- Spur gears are designed to transmit motion and power between parallel shafts. Configurations include spur, rack, pinion wire, stem pinions, and internal gears
- most with a selection of bores, keyways, and setscrews. Fine-pitch gears are available in plastic, brass, stainless steel, and steel. Heavier pitch spurs are available in steel and cast iron. Styles include plain, web, web with lightening holes, or spoked. Change gears have consecutive numbers of teeth for a variety of ratios.
features
- When you think "Special" Gears - Think Browning
- Browning Gears are rated in accordance with AGMA standards
- Browning Minimum Bore Spur Gear
| Outside Diameter (in) | 1 |
| Material | Steel |
| Diametral Pitch | 20 |
| Number of Teeth/Threads | 18 |
| Pitch Diameter | 0.9 in |
| Overall Length (in) | 0.9375 |
| Pressure Angle | 20 degrees |
| Bore (Min) (in) | 0.375 |
| Face Width (in) | 0.5 |
| Hub Diameter (in) | 0.75 |
| Standards Met | AGMA |
| Bore Size (in) | 0.375 |
| Length Through Bore (in) | 0.9375 |
| Pitch Diameter (in) | 0.9 |
| No. of Teeth | 18 |
| Bore Type | Minimum Plain Bore |
| Bore (Max) (in) | 0.5 |
| Hub Projection (in) | 0.4375 |
| Length Through Bore | 0.9375 in |
| Weight | 0.14 LB |
| EAN or UPC | 662289225736 |
