Find a Service Center
Boston Gear
710-30-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101808409
- 0.17 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Shackles must always be inspected for wear, distortion and damage
- If the pin or bow is worn, distorted or damaged, discard the entire shackle and replace
- Do not use round pin shackles in rigging applications
- Screw pin shackles should not be used if there will be movement on the pin
- Movement could cause the pin to unscrew and drop the load
- Always stand clear of loads being lifted
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Input Motor HP | 0.17 |
| Reduction Type | Single |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Output RPM @ 1750 rpm Input | 58.33 rpm |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Bolt Center | 3 3/4" x 2 7/8" |
| Torque Out @ 1150 rpm | 133 in lb |
| Ratio | 30:1 |
| Output (Shaft or Bore) Size | 1/2 in |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.125 hp @ 1800 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Center Distance | 1 in |
| Center Distance Code | 710 |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Box Length | 3 1/4 in |
| Base Mounting Attachment | No Base |
| Input Power Rating | 0.2 hp, 0.149 kW |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Shaft Assembly Code | J |
| Motor Application | General Purpose |
| Style | Right Angle |
| Output Shaft | Solid |
| Worm Position | Universal |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Input (Shaft or Bore) Size | 3/8 in |
| Media Mapping Output | J |
| Max. Input HP @ 100 rpm | 0.013 hp |
| Output Torque | 150 lb-in |
| Input Configuration | Shaft Input |
| Material | Cast Iron, Standard Paint |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Output Speed | 58.3 rpm |
| Housing Material | Cast Iron |
| Frame | N/A |
| Family Name | Std Unit |
| Lubrication | None |
| Box Height | 3 5/8 in |
| Output Configuration | Right Output |
| Frame Size | Shaft Input, Not a C-Face |
| Rated Efficiency | 69% |
| Washdown Duty | No |
| Base to Centerline of Output Shaft | 1 5/16 in |
| Series | 700 |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Right Output |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Torque Out @ 1750 rpm | 150 in lb |
| Use With | 710 |
| Input HP @ RPM | 0.1 hp @ 1150 rpm, 0.2 hp @ 1750 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Fan Cooled | No |
| Box Width | 2 1/2 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Torque @ RPM | 133 in lb @ 1150 rpm, 150 in lb @ 1750 rpm |
| Bolt Center Length x Bolt Center Width | 3 3/4 in x 2 7/8 in |
| Output Bore Shaft Dia. | 0.5 in |
| Standard | AGMA Service Class I |
| Weight | 6.1 LB |
| EAN or UPC | 781711515990 |
