Find a Service Center
Boston Gear
715-10-J
700 Series 10:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835972
- 1 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Bore Shaft Dia. | 0.75 in |
| Box Width | 3 11/16 in |
| Worm Position | Universal |
| Use With | 715 |
| Bolt Center Length x Bolt Center Width | 5 1/4 in x 4 5/16 in |
| Family Name | Std Unit |
| Frame Size | Shaft Input, Not a C-Face |
| Output Configuration | Right Output |
| Output RPM @ Input RPM | 175 rpm @ 1750 rpm |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Input HP @ RPM | 0.73 hp @ 1150 rpm, 1.2 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| Style | Right Angle |
| Frame | N/A |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Output Speed | 175 rpm |
| Input Power Rating | 1.2 hp, 0.895 kW |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Reduction Type | Single |
| Input (Shaft or Bore) Size | 5/8 in |
| Series | 700 |
| Shaft Assembly Code | J |
| Output Shaft Projection | Solid Right Output |
| Standard | AGMA Service Class I |
| Bolt Center | 5 1/4 in x 4 5/16 in |
| Output Torque @ RPM | 350 in lb @ 1150 rpm, 397 in lb @ 1750 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output (Shaft or Bore) Size | 3/4 in |
| Base to Centerline of Input Shaft | 3 29/64 in |
| Center Distance | 1.54 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Base to Centerline of Output Shaft | 1 29/32 in |
| Box Length | 5 1/8 in |
| Media Mapping Output | J |
| Center Distance Code | 715 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Box Height | 5 3/8 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Fan Cooled | No |
| Washdown Duty | No |
| Output Shaft | Solid |
| Output Torque | 397 lb-in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Input Configuration | Shaft Input |
| Output RPM @ 1750 rpm Input | 175 rpm |
| Ratio | 10:1 |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Torque Out @ 1150 rpm | 350 in lb |
| Lubrication | None |
| Input Motor HP | 1 |
| Torque Out @ 1750 rpm | 397 in lb |
| Max. Input HP @ 100 rpm | 0.086 hp |
| Base Mounting Attachment | No Base |
| Rated Efficiency | 92% |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Weight | 17.1 LB |
| EAN or UPC | 781711516355 |
