Find a Service Center
Boston Gear
7726-15-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809359
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Mounting of speed reducers in overhead positions may be hazardous
- Use of external guides or supports is strongly recommended for overhead mounting.
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Base Mounting Attachment | No Base |
| Bolt Center | 8 in x 5 1/4 in |
| Motor Application | General Purpose |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Style | Right Angle |
| Output Shaft | Solid |
| Input Configuration | Shaft Input |
| Shaft Assembly Code | G |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| HP @ RPM | 2 hp @ 1800 rpm |
| Output Configuration | Left Output |
| Frame Size | Shaft Input, Not a C-Face |
| Ratio | 15:1 |
| Series | 700 |
| Lubrication | None |
| Torque Out @ 1750 rpm | 1465 in lb |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Use With | 726 |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Frame | N/A |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Box Width | 4 7/16 in |
| Washdown Duty | No |
| Center Distance | 2.625 in |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Input Motor HP | 3 |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Input (Shaft or Bore) Size | 3/4 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Output Torque @ RPM | 1425 in lb @ 1150 rpm, 1465 in lb @ 1750 rpm |
| Max. Input HP @ 100 rpm | 0.28 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Box Length | 7 3/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Box Height | 8 in |
| Reduction Type | Single |
| Output Shaft Projection | Solid Left Output |
| Fan Cooled | No |
| Media Mapping Output | G |
| Rated Efficiency | 92% |
| Housing Material | Cast Iron |
| Family Name | Std Unit |
| Torque Out @ 1150 rpm | 1425 in lb |
| Input HP @ RPM | 2.01 hp @ 1150 rpm, 2.95 hp @ 1750 rpm |
| Center Distance Code | 726 |
| Output Speed | 116.7 rpm |
| Input Power Rating | 2.95 hp, 2.2 kW |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Output Torque | 1466 lb-in |
| Standard | AGMA Service Class I |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Worm Position | Universal |
| Weight | 41.1 LB |
| EAN or UPC | 781711517413 |
