Find a Service Center
Boston Gear
F710-5-B4-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101806194
- 0.5 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Fan Cooled | No |
| Output Speed | 350 rpm |
| Motor Frame Size | B442CZ |
| Input (Shaft or Bore) Size | 1/2 in |
| Standard | AGMA Service Class II |
| Frame Size | 42CZ |
| Bolt Center | 2 5/8" x 1 11/16" |
| Media Mapping Output | J |
| Max. Input HP @ 100 rpm | 0.044 hp |
| Output Torque | 113 lb-in |
| Keyway Size | 1/8 x 1/16 |
| Reduction Type | Single |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Output Shaft Projection | Solid Right Output |
| Motor Application | General Purpose |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Material | Cast Iron, Standard Paint |
| Family Name | F |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Base Mounting Attachment | No Base |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Media Mapping Style | F |
| Output Shaft | Solid |
| Motor HP | 0.3333 hp |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Output Torque @ RPM | 98 in lb @ 1150 rpm, 113 in lb @ 1750 rpm |
| Use With | 710 |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Series | 700 |
| Torque Out @ 1750 rpm | 113 in lb |
| Frame | 42CZ |
| Housing Material | Cast Iron |
| Washdown Duty | No |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Worm Position | Universal |
| Box Length | 4 1/4 in |
| Base to Centerline of Output Shaft | 1.31 in |
| Rated Efficiency | 91% |
| Center Distance Code | 710 |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 0.5 in |
| Box Height | 3 5/8 in |
| Input Power Rating | 0.69 hp, 0.515 kW |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Input HP @ RPM | 0.4 hp @ 1150 rpm, 0.69 hp @ 1750 rpm |
| Box Width | 3 11/32 in |
| Torque Out @ 1150 rpm | 98 in lb |
| Base | No |
| Ratio | 5:1 |
| Lubrication | None |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Bore Code | B4 |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Center Distance | 1 in |
| Input Motor HP | 0.50 |
| Style | Right Angle |
| Input Configuration | C-Face Quilled |
| Output Configuration | Right Output |
| Shaft Assembly Code | J |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output (Shaft or Bore) Size | 1/2 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Weight | 10.1 LB |
| EAN or UPC | 781711518519 |
