Find a Service Center
Boston Gear
F710-5-B4-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101806194
- 0.5 Input Motor hp
- 700 Series
- 1 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Shaft Assembly Code | J |
| Bore Code | B4 |
| Lubrication | None |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Base to Centerline of Input Shaft | 2 5/16 in |
| Output Torque @ RPM | 98 in lb @ 1150 rpm, 113 in lb @ 1750 rpm |
| Box Width | 3 11/32 in |
| Max. Overhung Load @ 1750 rpm | 150 lb/in |
| Input Configuration | C-Face Quilled |
| Rated Efficiency | 91% |
| Input Motor HP | 0.50 |
| Output Torque | 113 lb-in |
| Torque Out @ 1750 rpm | 113 in lb |
| Frame | 42CZ |
| Output Speed | 350 rpm |
| Bolt Center | 2 5/8" x 1 11/16" |
| Max. Input HP @ 100 rpm | 0.044 hp |
| Worm Position | Universal |
| Ratio | 5:1 |
| Series | 700 |
| Input Power Rating | 0.69 hp, 0.515 kW |
| Bolt Centers w/ Std. Base Kit (in) | 3 3/4 x 2 7/8 |
| Base to Centerline of Output Shaft | 1.31 in |
| Output Shaft | Solid |
| Base to Shaft Center Height w/Std. Base Kit | 2 3/4 in |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 0.5 in |
| Output (Shaft or Bore) Size | 1/2 in |
| Box Height | 3 5/8 in |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Max. Thrust Load @ 1150 rpm | 200 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 5.13 x 2.31 |
| Base Mounting Attachment | No Base |
| Motor Frame Size | B442CZ |
| Center Distance | 1 in |
| Standard | AGMA Service Class II |
| Input HP @ RPM | 0.4 hp @ 1150 rpm, 0.69 hp @ 1750 rpm |
| Max. Overhung Load @ RPM | 150 lb/in @ 1150 rpm, 150 lb/in @ 1750 rpm |
| Washdown Duty | No |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Fan Cooled | No |
| Motor HP | 0.3333 hp |
| Family Name | F |
| Output Configuration | Right Output |
| Input (Shaft or Bore) Size | 1/2 in |
| Media Mapping Output | J |
| Media Mapping Style | F |
| Center Distance Code | 710 |
| Reduction Type | Single |
| Box Length | 4 1/4 in |
| Material | Cast Iron, Standard Paint |
| Bolt Center Length x Bolt Center Width | 2 5/8 in x 1 11/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 2.94 in |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Use With | 710 |
| Keyway Size | 1/8 x 1/16 |
| Style | Right Angle |
| Output Shaft Projection | Solid Right Output |
| Frame Size | 42CZ |
| Housing Material | Cast Iron |
| Max. Thrust Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 98 in lb |
| Base | No |
| Weight | 10.1 LB |
| EAN or UPC | 781711518519 |
