Boston Gear
F713-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #100992030
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 311 in lb |
| Shaft Assembly Code | J |
| Material | Cast Iron, Standard Paint |
| Center Distance Code | 713 |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Frame | 56C |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Base Mounting Attachment | No Base |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Washdown Duty | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Series | 700 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Box Length | 4 1/4 in |
| Style | Right Angle |
| Center Distance | 1.33 in |
| Lubrication | None |
| Input HP @ RPM | 0.39 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Fan Cooled | No |
| Output Torque | 311 lb-in |
| Motor Frame Size | B556C |
| Family Name | F |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Input Power Rating | 0.39 hp, 0.291 kW |
| Ratio | 30:1 |
| Output Bore Shaft Dia. | 0.625 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Input Motor HP | 0.33 |
| Bolt Center | 3 1/4" x 2" |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Base | No |
| Media Mapping Output | J |
| Use With | 713 |
| Motor Application | General Purpose |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Base to Centerline of Output Shaft | 1.72 in |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output Speed | 58.3 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Output Torque @ RPM | 311 in lb @ 1750 rpm, 270 in lb @ 1150 rpm |
| Output Shaft Projection | Solid Right Output |
| Worm Position | Universal |
| Media Mapping Style | F |
| Output Shaft | Solid |
| Standard | AGMA Service Class I |
| Bolt Pattern | 3.25 x 2 |
| Frame Size | 56C |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Box Width | 4.03 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Height | 4 21/32 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Input Configuration | C-Face Quilled |
| Output Configuration | Right Output |
| Rated Efficiency | 74% |
| Reduction Type | Single |
| Motor HP | 1/4 hp |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Housing Material | Cast Iron |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Bore Code | B5 |
| Torque Out @ 1150 rpm | 270 in lb |
| Weight | 13.1 LB |
| EAN or UPC | 781711518878 |
| NSN Number | 6105-01-369-3074 |
