Find a Service Center
Boston Gear
F713-50-B5-G
700 Series 50:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809005
- 0.25 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Frame Size | 56C |
| Shaft Assembly Code | G |
| Media Mapping Style | F |
| Base to Centerline of Output Shaft | 1.72 in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Bore Code | B5 |
| Motor HP | 0.1667 hp |
| Center Distance Code | 713 |
| Max. Thrust Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Family Name | F |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Output Torque | 297 lb-in |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Height | 4 21/32 in |
| Max. Input HP @ 100 rpm | 0.018 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Lubrication | None |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ RPM | 200 lb/in @ 1150 rpm, 200 lb/in @ 1750 rpm |
| Base | No |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Input Configuration | C-Face Quilled |
| Box Length | 4 1/4 in |
| Center Distance | 1.33 in |
| Input Power Rating | 0.25 hp, 0.186 kW |
| Style | Right Angle |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Output Bore Shaft Dia. | 0.625 in |
| Box Width | 4.03 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Worm Position | Universal |
| Motor Application | General Purpose |
| HP @ RPM | 0.08333333 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output Shaft Projection | Solid Left Output |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Output Configuration | Left Output |
| Housing Material | Cast Iron |
| Bolt Center | 3 1/4" x 2" |
| Use With | 713 |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Reduction Type | Single |
| Series | 700 |
| Rated Efficiency | 66% |
| Output Speed | 35 rpm |
| Torque Out @ 1150 rpm | 248 in lb |
| Torque Out @ 1750 rpm | 297 in lb |
| Output (Shaft or Bore) Size | 5/8 in |
| Ratio | 50:1 |
| Input HP @ RPM | 0.12 hp @ 1150 rpm, 0.25 hp @ 1750 rpm |
| Motor Frame Size | B556C |
| Output Torque @ RPM | 248 in lb @ 1150 rpm, 297 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Material | Cast Iron, Standard Paint |
| Washdown Duty | No |
| Base Mounting Attachment | No Base |
| Input Motor HP | 0.25 |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Frame | 56C |
| Output Shaft | Solid |
| Fan Cooled | No |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Media Mapping Output | G |
| Weight | 13.1 LB |
| EAN or UPC | 781711518915 |
