Boston Gear
F715-15-B5-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101774351
- 0.75 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Input HP @ 100 rpm | 0.07 hp |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Motor Frame Size | B556C |
| Output Torque @ RPM | 428 in lb @ 1750 rpm, 376 in lb @ 1150 rpm |
| Reduction Type | Single |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Frame | 56C |
| Output Shaft Projection | Solid Left Output |
| Output Torque | 429 lb-in |
| Input Motor HP | 0.75 |
| Base | No |
| Bore Code | B5 |
| Center Distance Code | 715 |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Input Power Rating | 0.91 hp, 0.679 kW |
| Motor Application | General Purpose |
| Output Bore Shaft Dia. | 0.75 in |
| Style | Right Angle |
| Fan Cooled | No |
| Motor HP | 3/4 hp |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Box Height | 5 3/8 in |
| Family Name | F |
| Output Configuration | Left Output |
| Torque Out @ 1150 rpm | 376 in lb |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Shaft | Solid |
| HP @ RPM | 0.5 hp @ 1800 rpm |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Torque Out @ 1750 rpm | 428 in lb |
| Output (Shaft or Bore) Size | 3/4 in |
| Media Mapping Style | F |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Center Distance | 1.54 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Box Width | 5 1/16 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Use With | 715 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Input HP @ RPM | 0.91 hp @ 1750 rpm, 0.53 hp @ 1150 rpm |
| Box Length | 5 1/8 in |
| Standard | AGMA Service Class I |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Output Speed | 116.7 rpm |
| Ratio | 15:1 |
| Worm Position | Universal |
| Series | 700 |
| Rated Efficiency | 87% |
| Base to Centerline of Output Shaft | 1.91 in |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Lubrication | None |
| Washdown Duty | No |
| Base Mounting Attachment | No Base |
| Housing Material | Cast Iron |
| Media Mapping Output | G |
| Weight | 17.1 LB |
| EAN or UPC | 781711519035 |
