Boston Gear
F715-50-B5-G
700 Series 50:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834136
- 0.33 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Box Length | 5 1/8 in |
| Motor Application | Washdown Duty |
| Motor Frame Size | B556C |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron¦White Epoxy Coating |
| Standard | AGMA Service Class I |
| Output Shaft Projection | Solid Left Output |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Input Motor HP | 0.33 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Output Torque | 429 lb-in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output Shaft | Solid |
| Base to Centerline of Output Shaft | 1.91 in |
| Output (Shaft or Bore) Size | 3/4 in |
| Output Configuration | Left Output |
| Output Torque @ RPM | 360 in lb @ 1150 rpm, 429 in lb @ 1750 rpm |
| Shaft Assembly Code | G |
| Base | No |
| Center Distance | 1.54 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| HP @ RPM | 0.1666667 hp @ 1200 rpm, 0.25 hp @ 1800 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Torque Out @ 1150 rpm | 360 in lb |
| Bore Code | B5 |
| Use With | 715 |
| Center Distance Code | 715 |
| Style | Right Angle |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Output Bore Shaft Dia. | 0.75 in |
| Frame Size | 56C |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Lubrication | None |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Max. Input HP @ 100 rpm | 0.027 hp |
| Torque Out @ 1750 rpm | 429 in lb |
| Output Speed | 35 rpm |
| Series | 700 |
| Ratio | 50:1 |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Material | Cast Iron, Standard Paint |
| Media Mapping Style | F |
| Box Height | 5 3/8 in |
| Motor HP | 0.25 hp |
| Reduction Type | Single |
| Box Width | 5 1/16 in |
| Family Name | F |
| Rated Efficiency | 68% |
| Base to Centerline of Input Shaft | 3.4375 in |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Washdown Duty | Yes |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Worm Position | Universal |
| Media Mapping Output | G |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Input HP @ RPM | 0.18 hp @ 1150 rpm, 0.35 hp @ 1750 rpm |
| Frame | 56C |
| Fan Cooled | No |
| Input Configuration | C-Face Quilled |
| Weight | 17.1 LB |
| EAN or UPC | 781711519189 |
