Find a Service Center
- 700 Series
- 1.54 in Center Distance
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input HP @ RPM | 0.164 hp @ 1150 rpm, 0.28 hp @ 1750 rpm |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| Series | 700 |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Style | Right Angle |
| Output Bore Shaft Dia. | 0.75 in |
| Max. Thrust Load @ RPM | 400 lb/in @ 1150 rpm, 400 lb/in @ 1750 rpm |
| Base to Centerline of Output Shaft | 1.91 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Washdown Duty | No |
| Output Torque @ RPM | 312 in lb @ 1150 rpm, 399 in lb @ 1750 rpm |
| Reduction Type | Single Reduction |
| Max. Input HP @ 100 rpm | 0.022 hp |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Output Configuration | Left Output |
| Fan Cooled | No |
| Family Name | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Bore Code | B5 |
| Worm Position | Universal |
| Output (Shaft or Bore) Size | 3/4 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3.5 in |
| Center Distance | 1.54 in |
| Box Length | 5 1/8 in |
| Material | Cast Iron, Standard Paint |
| Box Width | 5 1/16 in |
| Torque Out @ 1750 rpm | 399 in lb |
| Torque Out @ 1150 rpm | 312 in lb |
| Frame | 56C |
| Max. Overhung Load @ RPM | 300 lb/in @ 1150 rpm, 300 lb/in @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Lubrication | None |
| Input Configuration | C-Face Quilled |
| Output Shaft Projection | Solid Left Output |
| Motor Application | General Purpose |
| Base | No |
| Housing Material | Cast Iron |
| Ratio | 60:1 |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Use With | 715 |
| Frame Size | 56C |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Center Distance Code | 715 |
| Output Shaft | Solid |
| Box Height | 5 3/8 in |
| HP @ RPM | 0.125 hp @ 1200 rpm, 0.1666667 hp @ 1800 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Weight | 17.1 LB |
| EAN or UPC | 781711439623 |
