Find a Service Center
Boston Gear
F718-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #102212067
- 0.5 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Input HP @ 100 rpm | 0.057 hp |
| Output Shaft Projection | Solid Right Output |
| Center Distance Code | 718 |
| Frame | 56C |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Lubrication | None |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Output Shaft | Solid |
| Style | Right Angle |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Torque Out @ 1750 rpm | 573 in lb |
| Use With | 718 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Base Mounting Attachment | No Base |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Bore Shaft Dia. | 0.875 in |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Output Configuration | Right Output |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Media Mapping Output | J |
| Family Name | F |
| Input (Shaft or Bore) Size | 5/8 in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Torque | 573 lb-in |
| Housing Material | Cast Iron |
| Output Torque @ RPM | 573 in lb @ 1750 rpm, 530 in lb @ 1150 rpm |
| Material | Cast Iron, Standard Paint |
| Motor Application | General Purpose |
| Series | 700 |
| Output Speed | 58.3 rpm |
| Fan Cooled | No |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Input HP @ RPM | 0.65 hp @ 1750 rpm, 0.4 hp @ 1150 rpm |
| Washdown Duty | No |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Shaft Assembly Code | J |
| Output (Shaft or Bore) Size | 7/8 in |
| Standard | AGMA Service Class II |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Box Length | 5 1/2 in |
| Base | No |
| Bore Code | B5 |
| Worm Position | Universal |
| Torque Out @ 1150 rpm | 530 in lb |
| Box Width | 5 1/32 in |
| Motor Frame Size | B556C |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Box Height | 5 3/4 in |
| Rated Efficiency | 82% |
| Ratio | 30:1 |
| Media Mapping Style | F |
| Input Motor HP | 0.50 |
| Input Configuration | C-Face Quilled |
| Motor HP | 1/2 hp |
| Reduction Type | Single |
| Input Power Rating | 0.65 hp, 0.485 kW |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Frame Size | 56C |
| Center Distance | 1.75 in |
| Weight | 19.1 LB |
| EAN or UPC | 781711519417 |
