Find a Service Center
Boston Gear
F718-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101350432
- 0.33 Input Motor hp
- 700 Series
- 1.75 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output (Shaft or Bore) Size | 7/8 in |
| Base to Centerline of Output Shaft | 2 1/16 in |
| Max. Overhung Load @ 1750 rpm | 500 lb/in |
| Base Mounting Attachment | No Base |
| Base | No |
| Input HP @ RPM | 0.35 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Media Mapping Style | F |
| Frame Size | 56C |
| Ratio | 60:1 |
| Material | Cast Iron, Standard Paint |
| Motor HP | 0.3333 hp |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.63 x 2.50 |
| Rated Efficiency | 70% |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Max. Thrust Load @ 1150 rpm | 500 lb/in |
| Bolt Centers w/ Vertical Base Kits (in) | 7.38 x 4.00 |
| Output RPM @ 1750 rpm Input | 29 rpm |
| Output Shaft | Solid |
| Fan Cooled | No |
| Box Height | 5 3/4 in |
| Output Torque Rating Range [Min] | 500 lb-in, 60 Nm |
| Worm Position | Universal |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Output Torque | 527 lb-in |
| Base to Shaft Center Height w/Std. Base Kit | 4.38 in |
| Output Bore Shaft Dia. | 0.875 in |
| Center Distance | 1.75 in |
| Lubrication | None |
| Bore Code | B5 |
| Output Torque @ RPM | 527 in lb @ 1750 rpm, 440 in lb @ 1150 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Use With | 718 |
| Max. Overhung Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Media Mapping Output | G |
| Motor Frame Size | B556C |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Standard | AGMA Service Class I |
| Shaft Assembly Code | G |
| Max. Input HP @ 100 rpm | 0.03 hp |
| Box Width | 5 1/32 in |
| Reduction Type | Single |
| Output Shaft Projection | Solid Left Output |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Frame | 56C |
| Output Torque Rating Range [Max] | 749 lb-in, 84 Nm |
| Input Power Rating | 0.35 hp, 0.261 kW |
| Style | Right Angle |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 5 3/4 x 4 1/2 |
| Torque Out @ 1150 rpm | 440 in lb |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Housing Material | Cast Iron |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Center Distance Code | 718 |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Motor Application | General Purpose |
| Input Motor HP | 0.33 |
| Series | 700 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Torque Out @ 1750 rpm | 527 in lb |
| Input Configuration | C-Face Quilled |
| Box Length | 5 1/2 in |
| Base to Centerline of Input Shaft | 3 13/16 in |
| Output Configuration | Left Output |
| Max. Thrust Load @ RPM | 500 lb/in @ 1750 rpm, 500 lb/in @ 1150 rpm |
| Output Speed | 29.2 rpm |
| Weight | 19.1 LB |
| EAN or UPC | 781711519486 |
