Find a Service Center
Boston Gear
F726-15-B7-G
700 Series 15:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809642
- 3 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Wear safety goggles
- Use a punch and chisel holder to prevent hand injury
- Keep the cutting edge of a chisel directed away
| Output Shaft Projection | Solid Left Output |
| Standard | AGMA Service Class I |
| Keyway Size | 3/16 x 3/32 |
| Ratio | 15:1 |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Worm Position | Universal |
| Box Height | 8 in |
| Output Speed | 116.7 rpm |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Output Bore Shaft Dia. | 1.125 in |
| Frame | 140TC, 180C |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Center Distance Code | 726 |
| Center Distance | 2.625 in |
| Torque Out @ 1150 rpm | 1425 in lb |
| Frame Size | 140TC, 180C |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Max. Input HP @ 100 rpm | 0.28 hp |
| Series | 700 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Motor HP | 2 hp |
| Torque Out @ 1750 rpm | 1465 in lb |
| Style | Right Angle |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Input Power Rating | 2.95 hp, 2.2 kW |
| Motor Frame Size | B7140TC180C |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Input Configuration | C-Face Quilled |
| Media Mapping Output | G |
| Lubrication | None |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Output Torque | 1466 lb-in |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Box Width | 5.9 in |
| Output Configuration | Left Output |
| Input HP @ RPM | 2.01 hp @ 1150 rpm, 2.95 hp @ 1750 rpm |
| Housing Material | Cast Iron |
| Use With | 726 |
| Input Motor HP | 3 |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Motor Application | General Purpose |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Input (Shaft or Bore) Size | 7/8 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Output Torque @ RPM | 1425 in lb @ 1150 rpm, 1465 in lb @ 1750 rpm |
| Box Length | 7 3/8 in |
| Material | Cast Iron, Standard Paint |
| Media Mapping Style | F |
| Output Shaft | Solid |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Washdown Duty | No |
| Base Mounting Attachment | No Base |
| Bore Code | B7 |
| Reduction Type | Single |
| HP @ RPM | 2 hp @ 1800 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Family Name | F |
| Rated Efficiency | 92% |
| Weight | 41.1 LB |
| EAN or UPC | 781711520239 |
| NSN Number | 6105-01-287-9474 |
