Find a Service Center
Boston Gear
F726-30-B5-J
700 Series 30:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870385
- 1.50 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Bore Shaft Dia. | 1.125 in |
| Family Name | F |
| Bolt Pattern | 6.38 x 3.38 |
| Input Power Rating | 1.68 hp, 1.253 kW |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Shaft Assembly Code | J |
| Motor HP | 1 hp |
| Media Mapping Output | J |
| Motor Application | General Purpose |
| Output Configuration | Right Output |
| Reduction Type | Single |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Input Motor HP | 1.50 |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Ratio | 30:1 |
| Worm Position | Universal |
| Standard | AGMA Service Class I |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Max. Input HP @ 100 rpm | 0.16 hp |
| Style | Right Angle |
| Box Width | 5.9 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Output Speed | 58.3 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Box Height | 8 in |
| Washdown Duty | No |
| Housing Material | Cast Iron |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Keyway Size | 3/16 x 3/32 |
| Bore Code | B5 |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Torque | 1521 lb-in |
| Torque Out @ 1150 rpm | 1575 in lb |
| Series | 700 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Motor Frame Size | B556C |
| Media Mapping Style | F |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Output Shaft | Solid |
| Input HP @ RPM | 1.68 hp @ 1750 rpm, 1.2 hp @ 1150 rpm |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Lubrication | None |
| Base Mounting Attachment | No Base |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Fan Cooled | No |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Input Configuration | C-Face Quilled |
| Frame Size | 56C |
| Center Distance | 2.625 in |
| Output Shaft Projection | Solid Right Output |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Material | Cast Iron, Standard Paint |
| Input (Shaft or Bore) Size | 5/8 in |
| Box Length | 7 3/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Frame | 56C |
| Output Torque @ RPM | 1521 in lb @ 1750 rpm, 1575 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Center Distance Code | 726 |
| Rated Efficiency | 84% |
| Use With | 726 |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Torque Out @ 1750 rpm | 1521 in lb |
| Weight | 41.1 LB |
| EAN or UPC | 781711520406 |
