Find a Service Center
Boston Gear
F726-40-B5-G
700 Series 40:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101856459
- 1 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Base to Centerline of Input Shaft | 5 9/16 in |
| Bore Code | B5 |
| Output Torque @ RPM | 1512 in lb @ 1750 rpm, 1500 in lb @ 1150 rpm |
| Rated Efficiency | 79% |
| Output Configuration | Left Output |
| Housing Material | Cast Iron |
| Standard | AGMA Service Class II |
| Ratio | 40:1 |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Input Power Rating | 1.33 hp, 0.992 kW |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Box Height | 8 in |
| Style | Right Angle |
| Output Shaft | Solid |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Input Configuration | C-Face Quilled |
| Fan Cooled | No |
| Bolt Pattern | 6.38 x 3.38 |
| HP @ RPM | 1 hp @ 1800 rpm |
| Base Mounting Attachment | No Base |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Output RPM @ Input RPM | 44 rpm @ 1750 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Motor HP | 1 hp |
| Motor Application | General Purpose |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Motor Frame Size | B556C |
| Input Motor HP | 1 |
| Center Distance Code | 726 |
| Output Shaft Projection | Solid Left Output |
| Lubrication | None |
| Shaft Assembly Code | G |
| Input HP @ RPM | 1.33 hp @ 1750 rpm, 0.89 hp @ 1150 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Output Bore Shaft Dia. | 1.125 in |
| Torque Out @ 1150 rpm | 1500 in lb |
| Torque Out @ 1750 rpm | 1512 in lb |
| Washdown Duty | No |
| Reduction Type | Single |
| Frame | 56C |
| Output Speed | 43.8 rpm |
| Media Mapping Output | G |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Center Distance | 2.625 in |
| Max. Input HP @ 100 rpm | 0.14 hp |
| Material | Cast Iron, Standard Paint |
| Input (Shaft or Bore) Size | 5/8 in |
| Media Mapping Style | F |
| Frame Size | 56C |
| Family Name | F |
| Output Torque | 1512 lb-in |
| Use With | 726 |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Box Length | 7 3/8 in |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Output RPM @ 1750 rpm Input | 44 rpm |
| Worm Position | Universal |
| Box Width | 5.9 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520444 |
| NSN Number | 6105-01-226-7232 |
