Find a Service Center
Boston Gear
F732-60F-B7-H
700 Series 60:1 Ratio H Assembly Single Reduction Worm Gear Reducer Without Base
Item #101870989
- 1.50 Input Motor hp
- 700 Series
- 3.25 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 2549 in lb |
| Max. Thrust Load @ 1150 rpm | 1100 lb/in |
| Fan Cooled | Yes |
| Input (Shaft or Bore) Size | 7/8 in |
| Housing Material | Cast Iron |
| Center Distance Code | 732 |
| Material | Cast Iron, Standard Paint |
| Bore Code | B7 |
| Output Torque Rating Range [Max] | 3499 lb-in, 309 Nm |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Vertical Base Kits (in) | 11.88 x 6.13 |
| Base to Shaft Center Height w/High Vert. Base Kit | 6 1/4 in |
| Series | 700 |
| Base to Centerline of Output Shaft | 3 1/2 in |
| Output (Shaft or Bore) Size | 1 3/8 in |
| Style | Right Angle |
| Worm Position | Universal |
| Motor Frame Size | B7140TC180C |
| Frame Size | 140TC, 180C |
| Motor HP | 1 1/2 hp |
| Input Power Rating | 1.75 hp, 1.305 kW |
| Output Speed | 29.2 rpm |
| Output Torque | 2549 lb-in |
| Standard | AGMA Service Class I |
| Max. Overhung Load @ RPM | 1300 lb/in @ 1150 rpm, 1300 lb/in @ 1750 rpm |
| Box Width | 7 9/16 in |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Max. Overhung Load @ 1750 rpm | 1300 lb/in |
| Box Height | 9 3/8 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 4 11/16 in |
| Shaft Assembly Code | H |
| Input Configuration | C-Face Quilled |
| Lubrication | None |
| Base to Shaft Center Height w/Std. Base Kit | 6 3/4 in |
| Bolt Center | 7 1/2 in x 4 in |
| Base Mounting Attachment | No Base |
| Use With | 732 |
| Output Torque @ RPM | 2549 in lb @ 1750 rpm, 2700 in lb @ 1150 rpm |
| Media Mapping Output | H |
| Family Name | F |
| Max. Input HP @ 100 rpm | 0.16 hp |
| Reduction Type | Single |
| Output Bore Shaft Dia. | 1.375 in |
| Output Configuration | Left & Right Output |
| Rated Efficiency | 67% |
| Base to Centerline of Input Shaft | 6 3/4 in |
| Box Length | 9 in |
| Output Shaft Projection | Solid Double Projecting Output |
| Max. Thrust Load @ RPM | 1100 lb/in @ 1150 rpm, 1100 lb/in @ 1750 rpm |
| Ratio | 60:1 |
| Output Shaft | Solid |
| Bolt Centers w/ Std. Base Kit (in) | 9 1/2 x 6 1/8 |
| Installed Options | Fan |
| Input HP @ RPM | 1.23 hp @ 1150 rpm, 1.75 hp @ 1750 rpm |
| Washdown Duty | No |
| Media Mapping Style | F |
| Center Distance | 3.25 in |
| Frame | 140TC, 180C |
| Torque Out @ 1150 rpm | 2700 in lb |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Input Motor HP | 1.50 |
| Output Torque Rating Range [Min] | 2500 lb-in, 235 Nm |
| Motor Application | General Purpose |
| Weight | 66.1 LB |
| EAN or UPC | 781711533734 |
