Find a Service Center
Boston Gear
F7713-15-B5-J
700 Series 15:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101342536
- 0.5 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Frame Size | 56C |
| Rated Efficiency | 86% |
| Output Torque Rating Range [Max] | 499 lb-in, 34 Nm |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Output RPM @ Input RPM | 117 rpm @ 1750 rpm |
| Input HP @ RPM | 0.66 hp @ 1750 rpm, 0.37 hp @ 1150 rpm |
| Motor HP | 1/2 hp |
| Input Motor HP | 0.50 |
| Bore Code | B5 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Base | No |
| Shaft Assembly Code | J |
| Input Configuration | C-Face Quilled |
| Torque Out @ 1750 rpm | 305 in lb |
| Box Width | 4.03 in |
| Output Speed | 116.7 rpm |
| Torque Out @ 1150 rpm | 262 in lb |
| Motor Frame Size | B556C |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Output RPM @ 1750 rpm Input | 117 rpm |
| Bolt Pattern | 3.25 x 2 |
| Base Mounting Attachment | No Base |
| Output (Shaft or Bore) Size | 5/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Reduction Type | Single |
| Output Torque Rating Range [Min] | 300 lb-in, 10 Nm |
| Style | Right Angle |
| Media Mapping Style | F |
| Use With | 713 |
| Frame | 56C |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Bore Shaft Dia. | 0.625 in |
| Output Shaft Projection | Solid Right Output |
| Center Distance Code | 713 |
| Base to Centerline of Output Shaft | 1.72 in |
| Material | Cast Iron, Standard Paint |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Fan Cooled | No |
| Output Shaft | Solid |
| Lubrication | None |
| Washdown Duty | No |
| Media Mapping Output | J |
| Box Length | 4 1/4 in |
| Output Torque | 305 lb-in |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Worm Position | Universal |
| HP @ RPM | 0.5 hp @ 1800 rpm, 0.3333333 hp @ 1200 rpm |
| Box Height | 4 21/32 in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Ratio | 15:1 |
| Standard | AGMA Service Class II |
| Output Torque @ RPM | 305 in lb @ 1750 rpm, 262 in lb @ 1150 rpm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Motor Application | General Purpose |
| Output Configuration | Right Output |
| Center Distance | 1.33 in |
| Series | 700 |
| Keyway Size | 3/16 x 3/32 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Input Power Rating | 0.66 hp, 0.492 kW |
| Bolt Center | 3 1/4" x 2" |
| Family Name | F |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Max. Input HP @ 100 rpm | 0.049 hp |
| Housing Material | Cast Iron |
| Weight | 13.1 LB |
| EAN or UPC | 781711518786 |
