Find a Service Center
Boston Gear
F7713-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #100992026
- 0.33 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Torque Out @ 1750 rpm | 311 in lb |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Rated Efficiency | 74% |
| Washdown Duty | No |
| Motor Application | General Purpose |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Bore Code | B5 |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 5/8 in |
| Frame | 56C |
| Output Torque @ RPM | 311 in lb @ 1750 rpm, 270 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Use With | 713 |
| Base to Centerline of Output Shaft | 1.72 in |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Motor HP | 1/4 hp |
| Housing Material | Cast Iron |
| Style | Right Angle |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Worm Position | Universal |
| Output Configuration | Left Output |
| Ratio | 30:1 |
| Media Mapping Style | F |
| Output Bore Shaft Dia. | 0.625 in |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Shaft | Solid |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Output Speed | 58.3 rpm |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Input Power Rating | 0.39 hp, 0.291 kW |
| Family Name | F |
| Lubrication | None |
| Input Motor HP | 0.33 |
| Standard | AGMA Service Class I |
| Media Mapping Output | G |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Center Distance | 1.33 in |
| Bolt Pattern | 3.25 x 2 |
| Max. Input HP @ 100 rpm | 0.029 hp |
| Output Shaft Projection | Solid Left Output |
| Output Torque | 311 lb-in |
| Base | No |
| Center Distance Code | 713 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Box Length | 4 1/4 in |
| Frame Size | 56C |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Torque Out @ 1150 rpm | 270 in lb |
| HP @ RPM | 0.25 hp @ 1800 rpm, 0.1666667 hp @ 1200 rpm |
| Reduction Type | Single |
| Material | Cast Iron, Standard Paint |
| Motor Frame Size | B556C |
| Input HP @ RPM | 0.39 hp @ 1750 rpm, 0.21 hp @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Series | 700 |
| Base Mounting Attachment | No Base |
| Input (Shaft or Bore) Size | 5/8 in |
| Bolt Center | 3 1/4" x 2" |
| Box Height | 4 21/32 in |
| Box Width | 4.03 in |
| Input Configuration | C-Face Quilled |
| Weight | 13.1 LB |
| EAN or UPC | 781711518854 |
