Find a Service Center
Boston Gear
F7713-5-B5-J
700 Series 5:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101834486
- 1 Input Motor hp
- 700 Series
- 1.33 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical "J" Base Kit (in) | 6.41 x 2.00 |
| Reduction Type | Single |
| Shaft Assembly Code | J |
| Bolt Centers w/ Std. Base Kit (in) | 4 3/8 x 3 5/16 |
| Max. Input HP @ 100 rpm | 0.091 hp |
| Bolt Pattern | 3.25 x 2 |
| Output Speed | 350 rpm |
| Max. Thrust Load @ 1150 rpm | 300 lb/in |
| Box Length | 4 1/4 in |
| Output (Shaft or Bore) Size | 5/8 in |
| Use With | 713 |
| Base Mounting Attachment | No Base |
| Bolt Center Length x Bolt Center Width | 3 1/4 in x 2 in |
| Material | Cast Iron, Standard Paint |
| Center Distance Code | 713 |
| Output Torque @ RPM | 235 in lb @ 1750 rpm, 200 in lb @ 1150 rpm |
| Frame Size | 56C |
| Motor Application | General Purpose |
| Frame | 56C |
| Base to Shaft Center Height w/Low Vert. Base Kit | 2.31 in |
| Worm Position | Universal |
| Box Width | 4.03 in |
| Lubrication | None |
| Media Mapping Output | J |
| Center Distance | 1.33 in |
| Ratio | 5:1 |
| Base | No |
| Input Configuration | C-Face Quilled |
| Motor HP | 1 hp |
| Washdown Duty | No |
| Series | 700 |
| Max. Overhung Load @ 1750 rpm | 200 lb/in |
| Output Shaft | Solid |
| Output Torque Rating Range [Max] | 299 lb-in, 34 Nm |
| Max. Thrust Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Input Motor HP | 1 |
| Output Bore Shaft Dia. | 0.625 in |
| Bolt Center | 3 1/4" x 2" |
| Motor Frame Size | B556C |
| Input HP @ RPM | 1.39 hp @ 1750 rpm, 0.84 hp @ 1150 rpm |
| Output RPM @ Input RPM | 350 rpm @ 1750 rpm |
| Base to Centerline of Input Shaft | 3 1/16 in |
| Base to Centerline of Output Shaft | 1.72 in |
| Output Torque Rating Range [Min] | 100 lb-in, 10 Nm |
| Input Power Rating | 1.39 hp, 1.037 kW |
| Output Torque | 235 lb-in |
| Input (Shaft or Bore) Size | 5/8 in |
| Housing Material | Cast Iron |
| Output RPM @ 1750 rpm Input | 350 rpm |
| Rated Efficiency | 94% |
| Family Name | F |
| Bolt Centers w/ Vertical Base Kits (in) | 6.16 x 3.25 |
| Output Shaft Projection | Solid Right Output |
| Base to Shaft Center Height w/Std. Base Kit | 3.47 in |
| Box Height | 4 21/32 in |
| Torque Out @ 1750 rpm | 235 in lb |
| HP @ RPM | 1 hp @ 1800 rpm |
| Output Configuration | Right Output |
| Bore Code | B5 |
| Base to Shaft Center Height w/High Vert. Base Kit | 3.56 in |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 2.94 in |
| Media Mapping Style | F |
| Standard | AGMA Service Class II |
| Style | Right Angle |
| Fan Cooled | No |
| Max. Overhung Load @ RPM | 200 lb/in @ 1750 rpm, 200 lb/in @ 1150 rpm |
| Torque Out @ 1150 rpm | 200 in lb |
| Weight | 13.1 LB |
| EAN or UPC | 781711518724 |
