Boston Gear
F7715-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101805904
- 0.5 Input Motor hp
- 700 Series
- 1.54 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Use With | 715 |
| Output Torque @ RPM | 446 in lb @ 1750 rpm, 388 in lb @ 1150 rpm |
| Bolt Center | 4 3/16 in x 2 3/4 in |
| Input Configuration | C-Face Quilled |
| Base | No |
| Bolt Centers w/ Vertical Base Kits (in) | 6.97 x 4.00 |
| HP @ RPM | 0.3333333 hp @ 1800 rpm, 0.25 hp @ 1200 rpm |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 7.25 x 2.50 |
| Ratio | 30:1 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 3 1/2 in |
| Motor Frame Size | B556C |
| Bolt Pattern | 4 3/16 x 2 3/4 |
| Frame Size | 56C |
| Center Distance | 1.54 in |
| Box Length | 5 1/8 in |
| Motor HP | 0.3333 hp |
| Torque Out @ 1150 rpm | 388 in lb |
| Output Shaft | Solid |
| Output Torque Rating Range [Max] | 499 lb-in, 59 Nm |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Frame | 56C |
| Output Configuration | Left Output |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3 in |
| Reduction Type | Single |
| Input Power Rating | 0.54 hp, 0.403 kW |
| Standard | AGMA Service Class I |
| Output Torque Rating Range [Min] | 300 lb-in, 35 Nm |
| Output Torque | 445 lb-in |
| Media Mapping Output | G |
| Base to Centerline of Input Shaft | 3 7/16 in |
| Output Shaft Projection | Solid Left Output |
| Material | Cast Iron, Standard Paint |
| Max. Overhung Load @ RPM | 300 lb/in @ 1750 rpm, 300 lb/in @ 1150 rpm |
| Shaft Assembly Code | G |
| Max. Thrust Load @ RPM | 400 lb/in @ 1750 rpm, 400 lb/in @ 1150 rpm |
| Center Distance Code | 715 |
| Media Mapping Style | F |
| Housing Material | Cast Iron |
| Input HP @ RPM | 0.54 hp @ 1750 rpm, 0.31 hp @ 1150 rpm |
| Box Height | 5 3/8 in |
| Rated Efficiency | 76% |
| Base to Shaft Center Height w/Std. Base Kit | 4.06 in |
| Base to Centerline of Output Shaft | 1.91 in |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Fan Cooled | No |
| Output (Shaft or Bore) Size | 3/4 in |
| Style | Right Angle |
| Lubrication | None |
| Input Motor HP | 0.50 |
| Output Speed | 58.3 rpm |
| Base to Shaft Center Height w/High Vert. Base Kit | 4.38 in |
| Torque Out @ 1750 rpm | 446 in lb |
| Input (Shaft or Bore) Size | 5/8 in |
| Family Name | F |
| Washdown Duty | No |
| Series | 700 |
| Bolt Center Length x Bolt Center Width | 4 3/16 in x 2 3/4 in |
| Max. Input HP @ 100 rpm | 0.04 hp |
| Bore Code | B5 |
| Motor Application | General Purpose |
| Base Mounting Attachment | No Base |
| Box Width | 5 1/16 in |
| Output Bore Shaft Dia. | 0.75 in |
| Max. Overhung Load @ 1750 rpm | 300 lb/in |
| Bolt Centers w/ Std. Base Kit (in) | 5 1/4 x 4 5/16 |
| Max. Thrust Load @ 1150 rpm | 400 lb/in |
| Worm Position | Universal |
| Weight | 17.1 LB |
| EAN or UPC | 781711519127 |
| NSN Number | 6105-01-360-9620 |
