Find a Service Center
Boston Gear
F7724-60-B5-G
700 Series 60:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101809379
- 0.75 Input Motor hp
- 700 Series
- 2.38 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque Rating Range [Max] | 1499 lb-in, 159 Nm |
| Motor HP | 1/2 hp |
| Media Mapping Output | G |
| Reduction Type | Single |
| Center Distance | 2.375 in |
| Fan Cooled | No |
| Bolt Center | 5 in x 2 7/8 in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 9.19 x 2.88 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.06 in |
| Output Bore Shaft Dia. | 1.125 in |
| Base to Centerline of Input Shaft | 4 7/8 in |
| Output Speed | 29.2 rpm |
| Bolt Center Length x Bolt Center Width | 5 in x 2 7/8 in |
| Input Configuration | C-Face Quilled |
| Motor Frame Size | B556C |
| Max. Overhung Load @ 1750 rpm | 900 lb/in |
| Output Configuration | Left Output |
| Max. Input HP @ 100 rpm | 0.073 hp |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Shaft Assembly Code | G |
| Ratio | 60:1 |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Torque Out @ 1150 rpm | 1040 in lb |
| Center Distance Code | 724 |
| Output Torque Rating Range [Min] | 1000 lb-in, 110 Nm |
| Family Name | F |
| Motor Application | General Purpose |
| Input (Shaft or Bore) Size | 5/8 in |
| Frame Size | 56C |
| Torque Out @ 1750 rpm | 1128 in lb |
| Bore Code | B5 |
| Input HP @ RPM | 0.49 hp @ 1150 rpm, 0.73 hp @ 1750 rpm |
| Lubrication | None |
| Base to Shaft Center Height w/High Vert. Base Kit | 5 1/4 in |
| Max. Overhung Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Output Shaft Projection | Solid Left Output |
| Standard | AGMA Service Class I |
| Housing Material | Cast Iron |
| Frame | 56C |
| HP @ RPM | 0.3333333 hp @ 1200 rpm, 0.5 hp @ 1800 rpm |
| Series | 700 |
| Output Torque | 1128 lb-in |
| Worm Position | Universal |
| Output Shaft | Solid |
| Output Torque @ RPM | 1040 in lb @ 1150 rpm, 1128 in lb @ 1750 rpm |
| Base to Shaft Center Height w/Std. Base Kit | 5.19 in |
| Input Motor HP | 0.75 |
| Material | Cast Iron, Standard Paint |
| Base Mounting Attachment | No Base |
| Output RPM @ Input RPM | 29 rpm @ 1750 rpm |
| Input Power Rating | 0.73 hp, 0.544 kW |
| Bolt Centers w/ Vertical Base Kits (in) | 8.94 x 4.88 |
| Box Height | 6 15/16 in |
| Style | Right Angle |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.38 in |
| Base to Centerline of Output Shaft | 2 1/2 in |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Washdown Duty | No |
| Bolt Centers w/ Std. Base Kit (in) | 7 1/16 x 4 7/8 |
| Box Width | 5 7/16 in |
| Media Mapping Style | F |
| Rated Efficiency | 71% |
| Use With | 724 |
| Output RPM @ 1750 rpm Input | 29.2 rpm |
| Box Length | 6 3/8 in |
| Weight | 30.1 LB |
| EAN or UPC | 781711520116 |
| NSN Number | 6105-01-461-1609 |
