Find a Service Center
Boston Gear
F7726-30-B5-G
700 Series 30:1 Ratio G Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835846
- 1.50 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Output Torque @ RPM | 1521 in lb @ 1750 rpm, 1575 in lb @ 1150 rpm |
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Frame | 56C |
| Keyway Size | 3/16 x 3/32 |
| Input Power Rating | 1.68 hp, 1.253 kW |
| Reduction Type | Single |
| Torque Out @ 1750 rpm | 1521 in lb |
| HP @ RPM | 1.5 hp @ 1800 rpm |
| Ratio | 30:1 |
| Family Name | F |
| Box Width | 5.9 in |
| Style | Right Angle |
| Output Shaft Projection | Solid Left Output |
| Output Torque Rating Range [Min] | 1500 lb-in, 160 Nm |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Box Height | 8 in |
| Output RPM @ Input RPM | 58 rpm @ 1750 rpm |
| Input HP @ RPM | 1.68 hp @ 1750 rpm, 1.2 hp @ 1150 rpm |
| Output RPM @ 1750 rpm Input | 58 rpm |
| Motor Application | General Purpose |
| Frame Size | 56C |
| Output Shaft | Solid |
| Series | 700 |
| Output Configuration | Left Output |
| Bore Code | B5 |
| Fan Cooled | No |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Media Mapping Style | F |
| Motor Frame Size | B556C |
| Material | Cast Iron, Standard Paint |
| Bolt Center Length x Bolt Center Width | 6 3/8 in x 3 3/8 in |
| Max. Thrust Load @ RPM | 900 lb/in @ 1750 rpm, 900 lb/in @ 1150 rpm |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Center Distance Code | 726 |
| Output Bore Shaft Dia. | 1.125 in |
| Shaft Assembly Code | G |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Output Speed | 58.3 rpm |
| Center Distance | 2.625 in |
| Output Torque Rating Range [Max] | 1999 lb-in, 234 Nm |
| Use With | 726 |
| Input Configuration | C-Face Quilled |
| Housing Material | Cast Iron |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4 3/4 in |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1750 rpm, 1000 lb/in @ 1150 rpm |
| Rated Efficiency | 84% |
| Output Torque | 1521 lb-in |
| Motor HP | 1 hp |
| Media Mapping Output | G |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Lubrication | None |
| Torque Out @ 1150 rpm | 1575 in lb |
| Input Motor HP | 1.50 |
| Standard | AGMA Service Class I |
| Box Length | 7 3/8 in |
| Bolt Pattern | 6.38 x 3.38 |
| Base Mounting Attachment | No Base |
| Washdown Duty | No |
| Max. Input HP @ 100 rpm | 0.16 hp |
| Input (Shaft or Bore) Size | 5/8 in |
| Worm Position | Universal |
| Weight | 41.1 LB |
| EAN or UPC | 781711520383 |
