Boston Gear
F7726-50-B5-J
700 Series 50:1 Ratio J Assembly Single Reduction Worm Gear Reducer Without Base
Item #101835995
- 1 Input Motor hp
- 700 Series
- 2.62 in Center Distance
- Single Reduction
description
- Our standard 700 Series - the heart of Boston Gear's speed reducer product line - has been serving many industries reliably for over 40 years. Its proven modular design has set the industry standard for performance and is the most imitated product in today's worm gear speed reducer market.
features
- Large oil reservoir provides efficient heat dissipation and lubrication for longer life
- Housing is straddle milled top and bottom for precise alignment
- Internal baffles ensure positive, leak-free venting
- Rugged housing fabricated of fine-grained cast iron for maximum strength and greater precision during worm and gear alignment
- Bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and load capacities on size 713 to 760
- High strength steel output shaft ensures capacity for high torque
- Pipe plugs allow easy fill, level and drain in any mounting position
- Super finished oil seal diameters on both input and output shafts extend seal life
caution
- Must be filled to the proper level with the recommended lubricant for your application before operation
| Bolt Centers w/ Vertical Base Kits (in) | 10.13 x 5.75 |
| Washdown Duty | No |
| Worm Position | Universal |
| Base Mounting Attachment | No Base |
| Output (Shaft or Bore) Size | 1 1/8 in |
| Base to Shaft Center Height w/High Vert. Base Kit | 5.59 in |
| Input Power Rating | 1.08 hp, 0.805 kW |
| Lubrication | None |
| Torque Out @ 1750 rpm | 1484 in lb |
| Fan Cooled | No |
| Bolt Center | 6 3/8 in x 3 3/8 in |
| Motor Frame Size | B556C |
| Standard | AGMA Service Class I |
| Rated Efficiency | 76% |
| Output Torque Rating Range [Max] | 1499 lb-in, 234 Nm |
| Media Mapping Output | J |
| Max. Thrust Load @ 1150 rpm | 900 lb/in |
| Base to Shaft Center Height w/Std. Base Kit | 5.81 in |
| Input Motor HP | 1 |
| Input (Shaft or Bore) Size | 5/8 in |
| Output Shaft Projection | Solid Right Output |
| Max. Thrust Load @ RPM | 900 lb/in @ 1150 rpm, 900 lb/in @ 1750 rpm |
| Input Configuration | C-Face Quilled |
| Reduction Type | Single |
| Motor HP | 1 hp |
| Output Torque Rating Range [Min] | 1000 lb-in, 160 Nm |
| Frame Size | 56C |
| Frame | 56C |
| Input HP @ RPM | 0.75 hp @ 1150 rpm, 1.08 hp @ 1750 rpm |
| Max. Overhung Load @ RPM | 1000 lb/in @ 1150 rpm, 1000 lb/in @ 1750 rpm |
| Torque Out @ 1150 rpm | 1482 in lb |
| Use With | 726 |
| Output Configuration | Right Output |
| Center Distance | 2.625 in |
| HP @ RPM | 1 hp @ 1800 rpm |
| Ratio | 50:1 |
| Family Name | F |
| Output RPM @ Input RPM | 35 rpm @ 1750 rpm |
| Material | Cast Iron, Standard Paint |
| Bolt Centers w/ Vertical "J" Base Kit (in) | 10.38 x 3.13 |
| Style | Right Angle |
| Output RPM @ 1750 rpm Input | 35 rpm |
| Box Height | 8 in |
| Max. Overhung Load @ 1750 rpm | 1000 lb/in |
| Base to Centerline of Input Shaft | 5 9/16 in |
| Output Speed | 35 rpm |
| Output Shaft | Solid |
| Output Torque @ RPM | 1482 in lb @ 1150 rpm, 1484 in lb @ 1750 rpm |
| Series | 700 |
| Box Width | 5.9 in |
| Bore Code | B5 |
| Output Bore Shaft Dia. | 1.125 in |
| Shaft Assembly Code | J |
| Base to Shaft Center Height w/Low Vert. Base Kit | 3.63 in |
| Box Length | 7 3/8 in |
| Housing Material | Cast Iron |
| Max. Input HP @ 100 rpm | 0.11 hp |
| Keyway Size | 3/16 x 3/32 |
| Output Torque | 1484 lb-in |
| Base to Centerline of Output Shaft | 2 15/16 in |
| Motor Application | General Purpose |
| Center Distance Code | 726 |
| Media Mapping Style | F |
| Thermal Input Horsepower @ 1750 RPM | N/A |
| Bolt Centers w/ Std. Base Kit (in) | 8 x 5 1/4 |
| Base to Shaft Center Height w/Vert. "J" Base Kit | 4.75 in |
| Weight | 41.1 LB |
| EAN or UPC | 781711520499 |
| NSN Number | 6105-01-229-1885 |
